Prep Flow Cell - Quartz - Agilent Technologies 1260 User Manual

11
Parts for Maintenance

Prep Flow Cell - Quartz

Prep Flow Cell - Quartz

For more details on the Preparative Flow Cells refer to the technical note that comes with
N O T E
the flow cells.
Item p/n
1
2
3
4
5
6
7
7
The flow cell comes with two tubings 0.8 mm i.d. and one 0.5 mm i.d. so that the
N O T E
combination at the flow cell could be either 0.8/0.8 or 0.5/0.8 (inlet/outlet).
Standard is 0.8/0.8. Depending on the system pressure (<30 mL/min) or bandbroadening,
the inlet tubing might be changed to 0.5 mm.
242
Description
G1315-60017 Prep flow cell quartz, 0.3 mm, 20 bar (2 MPa)
G1315-60018 Prep flow cell quartz, 0.06 mm (2 MPa)
G1315-67301 PTFE tubing 2 m length, 0.8 mm i.d., o.D. 1.6 mm
G1315-67302 PTFE tubing 80 cm length, 0.5 mm i.d., o.D. 1.6 mm
0100-1516 Fitting male PEEK, 2/pk
G1315-27705 Cell housing
G1315-84901 Clamp unit
G1315-84902 Handle for Clamp unit
0515-1056 Screw M 2.5, 4 mm lg
for cell body/clamp
G1315-80004 Quartz body - Prep Cell 0.3 mm
G1315-80003 Quartz body - Prep Cell 0.06 mm
Agilent 1260 Infinity DAD and MWD User Manual