10
Maintenance
Cleaning the Module
Cleaning the Module
The module case should be kept clean. Cleaning should be done with a soft
cloth slightly dampened with water or a solution of water and mild detergent.
Do not use an excessively damp cloth allowing liquid to drip into the module.
Liquid dripping into the electronic compartment of your module.
WA R N I N G
Liquid in the module electronics can cause shock hazard and damage the module.
➔
➔
196
Do not use an excessively damp cloth during cleaning.
Drain all solvent lines before opening any fittings.
Agilent 1260 Infinity DAD and MWD User Manual