3
Installing the Module
Installing the Detector
9 Turn on power by pushing the button at the lower left hand side of the
The module is turned on when the line power switch is pressed and the green indicator
N O T E
lamp is illuminated. The module is turned off when the line power switch is protruding and
the green light is off.
The module was shipped with default configuration settings. To change these settings see
N O T E
"Configuration Switch"
52
module. The status LED should be green.
Figure 11
Front View of Detector
on page 60.
Agilent 1260 Infinity DAD and MWD User Manual