Replacing The Compactflash Card (G1315C/G1365C Only) - Agilent Technologies 1260 User Manual

10
Maintenance

Replacing the CompactFlash Card (G1315C/G1365C only)

Replacing the CompactFlash Card (G1315C/G1365C only)

When If defective
Tools required None
Parts required #
1
Preparations Turn the detector OFF and have access to the rear of the detector.
The G1315C and G1365C is equipped with a CompactFlash card. This CompactFlash card is
N O T E
required for the operation of the detector (data buffering). DO NOT use other types of
CompactFlash cards. Only CompactFlash cards supplied with the detector or as
replacement with above part number are tested with the detector.
1 Remove the CompactFlash card by pulling it out of its slot in the rear of the
2 Install the new CompactFlash card into the slot.
3 Turn the detector ON.
228
p/n Description
01100-68700 CompactFlash Card Kit
detector.
Figure 79 Replacing CompactFlash card
Agilent 1260 Infinity DAD and MWD User Manual