Revision History - Omron CS1W-FLN22 Operation Manual

A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code
01 November 2004
02 November 2005
03 October 2010

Revision History

Cat. No. W440-E1-03
Date
Original production
"PC" replaced globally to "PLC" in the sense of Programmable Controller.
"CX-FLnet" added globally to FL-net Unit Support Software.
Page v: Signal word definitions changed.
Page xi: Table of manuals reworked.
Page xxi: Two precautions added in middle of page and addition about Startup
Mode made to existing precaution.
Page 8: New section 1-4 on CX-FLnet added.
Page 12: "10Base5" corrected to "100Base5" at top right corner.
Page 19: "0x2000" changed to "0x1fff" and "0x200" changed to "0x2000" in
table.
Page 29: Additions made in the right column for HER and PER.
Pages 39, 42, 145: "CX-Net" changed to "CX-Integrator."
Page 39: Last paragraph in Applicable Programming Devices deleted and addi-
tion made to the paragraph before it.
Pages 50 and 51: Section 4-2-1 reworked.
Pages 66 to 69: Most of section 5-2-1 reworked.
Pages 79 and 80: Figures replaced.
Page 79: Sentence removed from step 2.
Pages 91 and 96: "/CJ" added.
Pages 149 and 152: "CX-Programmer" changed to "CX-Integrator."
Pages 163 to 189: Moved to the last appendix and new section added.
System requirements for FL-net setting tool changed.
Revision code
Revised content
251