Omron CS1W-FLN22 Operation Manual page 146

Command/Response Reference
Program Example
Execute
condition
0000 A202
00 00
Execute
condition
0000 A202
00 00
120
Read enabled
message received
1506
01
@MOV(21)
@MOV(21)
@MOV(21)
@MOV(21)
@MOV(21)
@MOV(21)
@MOV(21)
@CMND(490)
Read enabled
message received
1506
01
@XFER(70)
DIFU(13)
• When a read enabled message is received and
150001 turns ON: Sends a transparent frame
just once when the Network Communications
Port Enabled Flag for port 0 and the execute con-
dition (CIO 000000) turn ON at port 0.
• Creates control data starting at D00000.
0002
Word Content
D00000
D00000 00
0004E
D00001 00
D00001
D00002 00
D00003 00
# 0000
D00002
D00004 00
# 0010
D00003
D00005 00
# 0002
D00004
# 0000
D00005
• Creates control data (command code) starting at
D01000.
# 2902
D01000
• Sends the transparent frame read command to
the FL-net Unit using the CMND(490) instruction.
D01000
D02000
D00000
• Using the data that is received: Stores the 10-
byte data (5 words) from D02034 (FA message
data) starting at CIO 0000.
# 0005
D02034
• Turns OFF the execute condition (CIO 000000).
0000
000000
Section 7-5
Meaning
02 Command data length = 2
bytes
4E Response data length = 78
bytes
00 Target network address = 0
10 Target node address = 0
Target node number address
= 10 Hex
02 Response required
Communications port No. = 0
Retries = 2
00 Response monitoring time =
2 s