Omron CS1W-FLN22 Operation Manual page 214

Operating Procedures
Comparing the FL-net
Setup on the Computer to
the Setup in the PLC
1,2,3...
188
2. Click the Yes Button. The transfer will begin and the following message will
be displayed if the transfer ends normally.
3. Click the OK Button.
1. Select Setting - Compare with PLC.
The results of comparison will be displayed.
When the Setup is the Same:
When There Are Differences
2. Click the OK Button. If there were differences, they will be displayed in a
list.
3. Click the Close Button.
Section 11-2