Omron CS1W-FLN22 Operation Manual page 255

FL-net Unit Support Software Ver. 1.6
• Specifying Node 2 (FL-net Unit number 3)
• Specifying Node 3 (FL-net Unit number 5)
Note (1) Connection via the FL-net network is only supported for FL-net Unit Support Software Ver. 1.60 or
later (FL-net Unit Support Software Ver. 1.51 or earlier cannot be used.)
(2) The unit number of the remote node's FL-net Unit must be specified when connecting via the FL-net
network.
(3) The FL-net Unit Support Software cannot be used at the same time (i.e., communicate online) as
CX-Programmer, CX-Net, or other Support Software.
Using Support Software Functions
Basic Operations
Starting
1. Click the Start Button.
2. Display the menu by moving the cursor from Program to OMRON.
3. Select FL-net Unit Support Software to start the program. The following screen will be displayed.
Main Screen
Appendix F
229