Omron CS1W-FLN22 Operation Manual page 130

Sending Commands from a PLC
(Continued from previous page.)
Execution
condition (See note)
000001 A20207 120000
120003
120002
(See note)
120002 A20207
120002 A21907
120002 120003 A21907
104
@MOV(21)
@MOV(21)
@MOV(21)
@MOV(21)
@MOV(21)
@RECV(98)
DIFU(13)
@XFER(70)
Note The Communications Port Enabled Flags at bits 0 to 7 in word A202 turn OFF
even when the PLCMR(260) instruction is being executed using the ports cor-
responding to those flags.
When the Communications Port Enabled Flag for port 7
is ON, and SEND(090) is not being executed, the trans-
S
KEEP
mission execution program will start when execution
120002
condition CIO 000001 turns ON.
R
Input CIO 120002 remains ON from the start of
RECV(098) execution until completion.
#0010
Control Data Creation
D00005
Word Contents
D0005 00
#0003
D0006 00
D00006
D0007 20
#2000
D0008 07
D00007
#0705
D0009 00
D00008
#0000
D00009
A total of 16 words of data beginning from word A100
at network number 3, node number 32, unit address 0
(the PC) is received at word CIO 2000 onwards of the
local node.
A100
2000
D00005
Reset Input Creation
120003
121001
Reception Error Display
Reception Data Processing
If there is no reception processing completion error, the
#0016
16 words of data received from word CIO 2000 on-
2000
wards is stored at D00040 onwards.
D00040
Section 7-2
Meaning
10 Number of reception words = 16
03 Destination network number = 3
00 Destination node number = 32
Destination unit address = 0
05 Response required.
Communications port No. used = 7
Number of retries = 5
00 Response monitor time = Default