Omron CS1W-FLN22 Operation Manual page 200

Operating Procedures
Connecting via the
Network
1,2,3...
174
5. Click the OK Button to close the dialog box.
6. Input the unit number (0 to 15) of the FL-net Unit to be connected in the
Communication Setting Dialog Box.
7. Click the Close Button to finish setting.
Select Connects via network to connect the computer and make settings for
each PLC (i.e., target PLC) with an FL-net Unit via the network by connecting
the CX-FLnet to a C-series or CV/CVM1-series PLC (called a gateway PLC).
Node 1
Example: Ethernet
Use the following procedure.
1. Select Network setting from the Setting Menu in the Main Window of the
CX-FLnet to display the Communication Setting Dialog Box.
Connect via network
Node 2 Node 3
CX-FLnet
Section 11-2