Operating Procedures
Data Link Status
Error Status
182
Note Each status is read from the FL-net Unit when the display function is started
from the menu.
Shows the data link status of remote nodes participating in the FL-net net-
work. The status shown here is the same as the connected node data which
is reflected in the CIO Area.
Lit (blue) nodes are participating in the data link.
The FL-net Unit status is displayed. The status shown here is the same as the
Unit status which is stored in the CIO Area.
■
FA Link active
Lit when FA Link operation is normal.
■
Received message
Lit when a transparent message is received.
■
Power supplied
Lit when transceiver power supply is normal.
■
FA Link Area mapping error
Lit when FA Link Area mapping is incorrect. Recheck the settings.
■
Token watchdog timer set error
Lit when time for monitoring token in the network is incorrect. This error
occurs for reasons such as a faulty network configuration.
Clear the error by resetting the Unit.
■
IP address set error
Lit when IP address setting is incorrect. Recheck the setting.
Section 11-2