Omron CS1W-FLN22 Operation Manual page 268

100base-tx, sysmac cs / cj series, fl-net units
Table of Contents

Advertisement

FL-net Unit Support Software Ver. 1.6
Local node status (only when local node is specified)
Shows the status of the local node when the node set by the node number is the local node. In this case, the
same data is displayed as for the network status.
Corresponding FL-net Standard Flag Names
FL-net Unit Support Software
Common Memory setting range error
Duplicate node number notification
Token monitoring timeout error
Frame standby error
Node status
Shows the participation status of the node.
FA Link status
Shows the network status of the node set by the node number.
Upper layer status
Shows the upper layer status.
ERR_CODE
0
Normal
1
CPU Unit servicing stopped.
Note For information on FL-net node error codes in systems by other companies, refer to the relevant manu-
als.
Allowed refresh cycle time, token watchdog timer, allowed min. frame interval
Displays the allowed refresh cycle time, the token watchdog timer, and the allowed minimum frame interval for
the node set by the node number.
Monitor (Message Sequential Status)
Shows the message sequential status.
242
FL-net standard flag name
Initialization Error Flag
Duplicate Node Number Flag
Token Monitoring Timeout Flag
Reception Standby Flag
Meaning
Appendix F

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cj1w-fln22

Table of Contents