Omron CS1W-FLN22 Operation Manual page 248

FL-net Unit Support Software Ver. 1.6
Functions
Name
File Initialize
File Open
Save to file (Japanese)
Save to file (English)
Communications settings
System setting
(CPU Bus Unit setup area)
System setting (Local node setup)
System setting (Other node setup)
Unit area setting
Monitor (Unit status)
Monitor (Network status)
Monitor (Node status)
Monitor (Data link status)
Monitor (Participating node status)
Monitor (Message sequential status)
Monitor (FA Link network status)
Option (Network setting)
Option (Extension setting)
222
Returns system and communications settings to their defaults.
Reads saved setup data. (CSV format only.)
Saves edited setup data in CSV format.
Saves edited setup data in CSV format.
Use this setting to read data from an English version of the FL-net Unit Support
Software.
Makes communications settings for connecting the computer to the PLC, and the
settings for Unit designation.
Sets the basic FL-net Unit data stored in the CPU Bus Unit Setup Area.
Makes settings related to cyclic data for the FL-net Unit at the local node.
Makes settings related to cyclic data for the FL-net Units at remote nodes.
Makes settings related to the settings and information in the Unit Area for the FL-
net Unit.
Shows the Unit status.
Shows the network status.
Shows the node status.
Shows the data link status.
Shows the participating node status.
Shows the message sequential status.
Shows the FA Link network status.
Sets the communications settings when setting FL-net Unit settings of other
nodes via the FL-net network.
Sets the order of data link data.
Function
Appendix F