Omron CS1W-FLN22 Operation Manual page 254

FL-net Unit Support Software Ver. 1.6
Connecting Via the FL-net Network
Node 1
FL-net Unit
Unit number 0
Select Network setting from the Option Menu in the Main Window of the FL-net Unit Support Software, and
specify the remote PLC's network address and node address. Specify the unit number for the FL-net Unit in the
Unit No. field under Communication settings.
1. Select Network setting from the Option Menu in the Main Window of the FL-net Unit Support Software to
display the Destination Network Setting Dialog Box.
2. Select the destination node in the Destination Node Address field (1 in this example) and click the OK But-
ton.
3. Specify the unit number for the FL-net Unit (0 in this example) in the Unit No. field under Communication
settings in the Main Window of the FL-net Unit Support Software. The specified destination address will be
displayed in the status bar.
The unit number of the remote FL-net Unit must be specified when connecting via the FL-net network. In this
configuration example, after specifying the destination node address in the Destination Node Setting Dialog
Box, node 2 is set to unit number 3, and node 3 is set to unit number 5.
228
Node 2
Node 3
FL-net Unit
FL-net Unit
Unit number 5
Unit number 3
Make the settings via the FL-net network.
Appendix F