Appendix F
FL-net Unit Support Software Ver. 1.6
Monitor (Network Status)
Shows the network status of the FL-net Unit.
The status shown here is the same as the network status which is reflected in the CIO Area.
Multiple node number
Lit when a node number is used more than once. Recheck the Unit and the settings.
Upper layer operation signal error
Lit when an error occurs between the Unit and the PLC. Reset the Unit.
Common Memory enabled
Lit when Common Memory data is enabled.
Lit after Unit restart if the settings are normal.
Common Memory set
Lit when Common Memory settings are completed.
Lit after Unit restart if the settings are normal.
Multiple addresses
Lit when a local node Common Memory address is used more than once. Recheck the Unit and the settings.
239