Omron CS1W-FLN22 Operation Manual page 199

Operating Procedures
Connecting Directly
1,2,3...
Note The network type (i.e., Connects directly or Connects via network) should nor-
mally be set to Connects directly. Use the Connects via network setting when
connecting the computer to a C-series or CVM1/CV-series PLC.
Select Connects directly if the computer is connected to the peripheral port
(or COM port) of a CS/CJ-series PLC.
Node 1
CS/CJ Series
CPU unit
Use the following procedure.
1. Select Network setting from the Setting Menu in the Main Window of the
CX-FLnet to display the Communication Setting Dialog Box.
2. Select Connects directly in the Network Area.
3. Click the Change settings Button to display Change PLC Dialog Box.
4. Set the PLC and network. To connect to another node on FL-net network,
click the Settings Button and set the FINS destination network address
and node address.
Node 2 Node 3
Sets via FL-net network
CX-FLnet
Section 11-2
173