Omron CS1W-FLN22 Operation Manual page 134

Command/Response Reference
Mode Setting (Response)
First byte
15 14 13 12 11 10
− −
1) System type
108
The mode set in the system setup is returned.
Second byte
9 8 7 6 5 4 3
−
2) IP
address
setting
1. System Type
Bits 12 to 15 show the type of Unit.
Bit
15 14
0 0
Others
2. IP Address Setting
These bits provide details about the type of IP address settings.
Bit
7 6
0 0 Operates with the IP address switch setting on the back of the Unit.
1 0 Operates with the IP address switch setting on the back of the Unit
and the node address switch setting on the front of the Unit.
0 1 Operates with the CPU Bus Unit system setting that is set through the
CX-FLnet or FL-net Unit Support Software.
1 1 Operates with the default setting
(192.168.250.node_address_switch_setting).
3. FA Link Allocation Table Storage Method
This bit provides details about where the data link (FA link allocation) table
is stored.
Bit
0
0 Store in CPU Unit
Stores the data link tables (FA link allocations) in the System Bus Unit setup
area of the CPU Unit.
1 Store in FL-net Unit
Stores the data link tables (FA link allocations) in the FL-net (Ver. 2.00) Unit
EEPROM.
2 1 0
−
3) FA Link allocation table storage method
4) FA Link startup method
5) Message procedure check
6) Broadcast format
7) Data sending order (sequential/reverse direction)
8) Baud rate
13 12
0 1 FL-net Unit
Parameter error
Description
Section 7-5
Description
Description