Display Pim-Snooping Routing-Table - HP 5900 Series Command Reference Manual

Field
Router ports (2 in total)
(00:01:30)

display pim-snooping routing-table

Use display pim-snooping routing-table to display PIM snooping routing entries.
Syntax
display pim-snooping routing-table [ vlan vlan-id ] [ slot slot-number ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan vlan-id: Specifies a VLAN in the range of 1 to 4094. If you do not specify a VLAN, the command
displays PIM snooping routing entries for all VLANs.
slot slot-number: Specifies an IRF member device by its member ID or a PEX by its virtual slot number. If
you do not specify this option, the command displays PIM snooping routing entries on the master device.
verbose: Displays detailed information. If you do not specify this keyword, the command displays brief
information.
Examples
# Display detailed information about PIM snooping routing entries for VLAN 2.
<Sysname> display pim-snooping routing-table vlan 2 verbose
Total 1 entries.
FSM Flag: NI-no info, J-join, PP-prune pending
VLAN 2: Total 1 entries.
(172.10.10.1, 225.1.1.1)
Upstream neighbor: 20.1.1.1
FSM information: normal
Upstream Slots (0 in total):
Upstream Ports (1 in total):
XGE1/0/1
Downstream Slots (0 in total):
Downstream Ports (2 in total):
XGE1/0/2
Description
Router ports, and the total number of the router ports.
Remaining aging time for the router port.
•
•
Expires: 00:03:01, FSM: J
For a global port, this field is always displayed.
For a non-global port, this field is displayed if the port is on the master
device. Otherwise, you must specify the slot slot-number option to display
this field.
48