Adjusting The Solenoid; Adjustment Of The Bypass Gate Solenoid (Sd1) - Konica Minolta bizhub 500 Service Manual

3. MECHANICAL ADJUSTMENT
3.3

Adjusting the solenoid

3.3.1

Adjustment of the bypass gate solenoid (SD1)

A. Procedure
[1]
26
[2] [3] [4]
4521f3c006na
Confidential – for internal use only, do not distribute
Field Service Ver.1.0 Feb. 2006
1.
Remove the upper cover.
(See P.6)
2.
Remove the rear cover.
(See P.10)
3.
Loosen the screw [1].
4.
Move the bypass gate solenoid (SD1) [2] in the
arrow-marked direction [3] and tighten the screw
[1] when the length of "A" [4] comes to the speci-
fied value.
Specified value "A" = 4.4 mm