Enable Isis; Configure Isis Nni Interfaces - Avaya 8800 Engineering Manual

router isis
spbm 1 smlt-virtual-bmac 00:49:00:01:05:01
spbm 1 smlt-peer-system-id 0049.0001.0600
exit
This step is only required on SPB nodes supporting SMLT. The virtual B-MAC must be the same

on both SMLT cluster switches. The peer-system-id is the SMLT cluster's peer system-id. Note,
by default, if you do not configure the SMLT virtual-bmac, it will be automatically created using
the lowest B-MAC of the SMLT cluster plus 1.
2.2.8

Enable ISIS

CLI
isis enable
ACLI
router isis enable
2.2.9

Configure ISIS NNI Interfaces

2.2.9.1 Port Level
CLI
ethernet 2/5 isis create
ethernet 2/5 isis spbm 1 state enable
ethernet 2/5 isis enable
ACLI
interface GigabitEthernet 3/3
isis
isis spbm 1
isis enable
exit
VSP 7000:
interface fastEthernet 3/3
isis
isis spbm 1
isis enable
exit
February 2013
Avaya Inc. – External Distribution
avaya.com
14