PoE configuration using the CLI
config poe card <slotlist> notification-control
config poe port <portlist> admin
config poe port <portlist> power-priority
config poe port <portlist> power-limit
config poe port <portlist> power-detection-
control
config poe port <portlist> type
show poe sys info
show poe card info
show poe port info
show poe port power-measurement
show poe port stats
PoE card settings configuration
Use the procedures in this section to manage the configuration of the PoE card.
PoE card settings configuration navigation
•
Enabling PoE card power administration
•
Setting the PoE card power usage threshold
•
Setting the PoE card power allocation priority
•
Setting the PoE card power limit
•
Enabling and disabling PoE card notification control
Enabling PoE card power administration
Enable the main power administration on the PoE card to configure it for the required
powerflow.
40
Configuration — Power over Ethernet
Command
on page 42
Parameter
<enable|disable>
<enable|disable>
<low|high|critical>
<value>
<auto|test>
<other|telephone|webcam|wireless>
<slotlist>
<portlist>
<portlist>
<portlist>
on page 40
on page 41
on page 42
on page 44
May 2011