Chapter 42: Wan Interfaces; T1/E1; Module Configuration - Avaya 1000 Series Configuration Manual

Chapter 42: WAN Interfaces

T1/E1

Secure Routers are available with T1/E1 WAN interfaces. Secure Router 1000 does not
support Channelized T3 or DS3. Consult the SR1000 Installation Guide for details on WAN
interface types, cabling, and pinouts.
This document outlines the configuration of module parameters (Layer 1) and, to a lesser
degree, the configuration of bundle parameters (Layer 2). The bundle configuration examples
demonstrate linking of physical interfaces (modules) to logical interfaces (bundles). Module
configuration occurs within the configure module tree of the Secure Router CLI, and bundle
configuration occurs within the configure interface bundle tree.
Secure Router T1 interfaces support logical interfaces made up of fractional T1, single T1, and
multi-link T1 connections.

Module Configuration

T1
The following example configures the operational and descriptive parameters for T1 number 6.
Configure T1 Parameters
SR/configure> module t1 6
SR/configure/module/t1> circuitId X1234567890
SR/configure/module/t1> contactInfo George_Anderson
SR/configure/module/t1> description T1_to_Troy
SR/configure/module/t1> framing esf
SR/configure/module/t1> linecode b8zs
SR/configure/module/t1> clock_source line
SR/configure/module/t1> exit
Avaya Secure Router 1000 Series Configuration Guide December 2010 269