Installing Scopia ® Xt Control To Use Keyboard And Mouse; Installing Scopia Xt Executive) - Avaya Scopia XT7100 Deployment Manual

Table 16: Configuring basic SIP settings for the XT Series
Field
User
Authentication Name
Authentication Password
Use SIP Server
Server Address
2. Select Done to complete the Quick Setup Wizard.
3. To configure advanced SIP settings, such as the preferred transport protocol, see
Registering the XT Series to a SIP Server
Related Links
Configuring Basic Settings with the Quick Setup Wizard
Installing Scopia
®
(Scopia XT Executive)
About this task
This procedure describes how to configure your Scopia
with a keyboard and mouse by installing Scopia
Windows or Mac (see
Note:
You cannot install the Scopia
Yosemite operating system. The Yosemite operating system does not allow you to install
packages obtained from outside of the Apple Store. However, there is a workaround available to
enable you to obtain and run the installation package if you have the Yosemite operating
system. For more information, see
®
The Scopia XT Control utility can only be installed from the endpoint's web interface.
April 2015
Description
Enter the system name (alias). The system is registered to the SIP
server under this name.
When connecting over SIP, this name is displayed on the monitors
participating in the videoconference (for example, John-Smith, or
9th-Floor-Room) .
If necessary, enter the name for authenticating the XT Series with
the SIP server. It can be the same as the User parameter.
If necessary, enter the password for authenticating your XT Series
with the SIP server.
Enable registering the system to the SIP server by selecting Yes.
For redundant SIP deployments, you can enter information for up to
three SIP servers, as described in
SIP Server
Enter the DNS name or IP address of the SIP server, used to
register the endpoint.
®
XT Control to Use Keyboard and Mouse
Navigating Menus with the Keyboard and Mouse
®
XT Control installation package on a Mac that is running the
Resolving download problems
Comments? infodev@avaya.com
Configuring Basic Settings with the Quick Setup Wizard
Registering the XT Series to a
on page 107.
on page 107.
on page 83
®
XT Executive (only) to navigate its menus
®
XT Control, a small standalone program for
on page 198.
®
Avaya Scopia XT Series Deployment Guide
on page 73).
91