Enabling And Configuring Recording - Avaya Scopia XT7100 Deployment Manual

Advanced Configuration of the XT Series
Field Name
DTMF H.245 UII
RTP Firewall
Select dialing number format mode
Separator
3. From the web interface only, select Save.
Related Links
Advanced Configuration of the XT Series

Enabling and Configuring Recording

About this task
You can record meetings to a locally connected USB storage device or the network. This procedure
describes how to configure your recording preferences, such as where to record meetings. When
recording meetings to the USB device, you can also define the video resolution and bitrate. This is
useful, for example, to increase the time available for recording by saving disk space.
You can view recordings from the local USB storage device either on the XT Series or using any
standard media player. The system saves the file as an MP4, and records the video in H.264 format
with audio in AAC-LC format. You can view recordings saved to the network via the Scopia
Desktop Web Portal (see User Guide for Avaya Scopia
If using a USB device to record a videoconference hosted by your built-in MCU, up to six remote
endpoints can join the meeting (if your license is MCU 9). If your license is MCU 4, up to three
remote endpoints can join. If more remote endpoints already joined, you cannot start a recording.
To disable recording and playback, follow the procedure below to access the recording settings, and
select No Recording in the Location field.
Before you begin
You may need a license to record meetings on your XT Series, depending on your model. For more
information, see Activating the XT Series and its Optional Features
®
Avaya Scopia XT Series Deployment Guide
144
Description
are compatible with this format. To enable, the remote
H.323 endpoint must also support RFC2833.
Select Yes (default) to enable out-of-band DTMF
transmissions in H.323 calls. Select No if you deployed
some legacy H.323 equipment which does not support
out-of-band DTMF.
See Enabling Encryption for Videoconferences
page 169.
If your XT Series is not registered with an H.323
gatekeeper, you can still dial an endpoint registered
with a gatekeeper. Check which format of dialing the
gatekeeper accepts and configure it in this field:
<gatekeeper number><separator><extension of the
called endpoint>(default), or <extension>
<separator><number>.
Select the separator used when dialing to the
gatekeeper. The default separator is ##.
on page 112
®
Desktop Client).
Comments? infodev@avaya.com
on page 78.
on
®
April 2015