Backing Up And Restoring Xt Series Certificates - Avaya Scopia XT7100 Deployment Manual

The certificate is validated and its details appear
Signing Request for XT Series
Tip:
Verify the system's time is synchronized with SNTP, otherwise you may need to wait a
few hours before using this certificate (for details, see
page 93). You can start using this certificate from the time in the notBefore field in the
signed certificate.
11. Continue with
Related Links
Securing Connections to the XT Series Using TLS

Backing Up and Restoring XT Series Certificates

About this task
This section explains how to backup and restore certificates using a USB key to store the certificate
information. You can only perform this procedure from the endpoint's interface. If you want to delete
the certificates without first backing them up, proceed as explained in
Certificates on page 166.
Procedure
1. Connect a USB key to the upper USB port of the XT Codec Unit
USB Key to the XT Codec Unit
April 2015
on page 162).
Figure 118: Signed certificate from the CA
Enabling the TLS Connection in XT Series
on page 166).
Comments? infodev@avaya.com
Securing Connections to the XT Series Using TLS
(Generating and Uploading a Certificate
Setting Date and Time
on page 167.
on page 160
Deleting XT Series
(Figure 119: Connecting a
®
Avaya Scopia XT Series Deployment Guide
on
165