Resolving Problems Viewing Computer Content - Avaya Scopia XT7100 Deployment Manual

Not connect to network
Your computer or XT Series is not connected to the network.
Solution
Your DVI cable is not connected properly to the Scopia
Verify that your computer is connected to the Scopia
Connecting a Computer to the XT Series
1. Verify that your computer is connected to the network.
2. Verify that your XT Series is connected to the network by checking that the cables are
connected correctly (see
Another computer already connected
Another computer is already connected to the Scopia
Solution
Verify that only your computer is connected by checking the XT Series web interface.
Authentication required
®
If using the Scopia
®
Scopia XT Control each time it is connected. The
Solution
®
Connect to Scopia
Related Links
Troubleshooting the Avaya Scopia

Resolving Problems Viewing Computer Content

Problem
I cannot sshare a presentation from my computer or view its content.
April 2015
Figure 148: Monitoring the status from the web interface
Setting Up the XT Series Hardware
XT Executive as a room endpoint, the computer must be authenticated with
XT Control as described in User Guide for XT Series.
®
XT Series
Comments? infodev@avaya.com
Resolving Problems Viewing Computer Content
®
XT Executive.
®
XT Executive properly, as described in
on page 65.
®
XT Executive.
icon indicates that authentication is required.
on page 172
®
Avaya Scopia
on page 42).
XT Series Deployment Guide
197