Securing Connections To The Xt Series Using Tls - Avaya Scopia XT7100 Deployment Manual

Securing your XT Series
2. Set the fields as described in
Table 49: Enabling remote upgrades
Field Name
Download Management
Enable all addresses
Address
Subnet Mask
3. From the web interface only, select Save.
4. To upgrade the XT Series, see
Related Links
Securing your XT Series

Securing Connections to the XT Series Using TLS

You can configure your video network devices, both Scopia
Transport Layer Security (TLS) for the SIP protocol.
®
Avaya Scopia XT Series Deployment Guide
160
Figure 112: Enabling remote access to the XT Series
Table 49: Enabling remote upgrades
Description
Select Yes to enable remote upgrades.
Select Yes to enable remote upgrades from any IP address. Select No
to restrict access from a specified range of addresses only, defined in
the Address and Subnet mask fields in this screen.
Specify the IP address allowed to upgrade this device remotely (only
relevant if you set the Enable all addresses field to No). This can
represent a range of addresses in conjunction with the Subnet Mask
field.
Turn the above Address field into a range of addresses by defining its
subnet mask. This range represents the addresses allowed to upgrade
this device remotely (only relevant if you set the Enable all addresses
field to No).
Updating the XT Series
on page 156
Comments? infodev@avaya.com
on page 160.
on page 153.
®
Solution and third-party, to support
April 2015