Cancelling The Echo On Hdmi Monitors - Avaya Scopia XT7100 Deployment Manual

2. Disable specific audio codecs by selecting No from the lists.
3. From the web interface only, select Save.
Related Links
Troubleshooting the Avaya Scopia

Cancelling the Echo on HDMI Monitors

About this task
An HDMI monitor might insert a delay in the audio, causing an echo.
To improve echo cancellation performance with Microphone Pods, you can use the system's
automatic or manual estimation of the audio delay. You can also generate the audio delay manually.
Then you can train the echo cancellation to use the manual estimation as described in this
procedure.
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Procedure
1. Access the echo cancellation settings. From the XT Series web interface, select
Administrator Settings > I/O connections > Audio-Inputs > Echo canceller. From the
endpoint's main menu, select Configure > Advanced > I/O connections > Audio-Inputs >
Echo canceller.
April 2015
Figure 135: Configuring audio settings from the web interface
®
XT Series
Comments? infodev@avaya.com
Cancelling the Echo on HDMI Monitors
on page 172
on page 112.
®
Avaya Scopia XT Series Deployment Guide
183