Avaya Scopia XT7100 Deployment Manual page 188

Troubleshooting the Avaya Scopia
2. Make sure that the Moving field is set to Yes.
3. From the web interface only, select Save.
Receiving resolution
The resolution you can receive has not been configured correctly.
Solution
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
1. Access the video settings. From the XT Series web interface, select Administrator
Settings > Calls > Preferences > Video. From the endpoint's main menu, select
Configure > Advanced > Calls > Preferences > Video.
®
Avaya Scopia XT Series Deployment Guide
188
® XT Series
Figure 139: Enabling the Moving setting from the web interface
Comments? infodev@avaya.com
on page 112.
April 2015