Defining Qos Priority Of Types Of Network Traffic - Avaya Scopia XT7100 Deployment Manual

Advanced Configuration of the XT Series
2. Set the fields as described in
Table 31: Configuring NAT-related settings
Field Name
NAT Traversal
NAT Discovery
Refresh Time (sec)
Keepalive
3. From the web interface only, select Save.
Related Links
Configuring Advanced Network Settings

Defining QoS Priority of Types of Network Traffic

About this task
Quality of Service (QoS) determines the priorities of different types of network traffic (audio, video
and control/signaling), so in poor network conditions, prioritized traffic is still fully transmitted. For
®
Avaya Scopia XT Series Deployment Guide
122
Figure 84: Configuring NAT traversal settings from the web interface
Table 31: Configuring NAT-related settings
Description
Select to allow the system to be located behind a firewall/NAT.Set to No if
the system has a public IP address.
Enter the method used for the XT Series to discover its public IP address:
• HTTP discovery uses an Avaya HTTP server to return the public IP
address. The endpoint must be directly connected to the internet.
• Manual lets you set the public IP address manually in the Public IP
Address field.
• (Recommended) STUN autodiscovery uses a public STUN server to
return the unit's public IP address. If you choose this, enter the Server
and Port of the STUN server.
Enter the number of seconds to open a pinhole through the firewall. Also
used by H.460 as TTL (Time To Live) of registration requests.
Ensures the connection is kept open by sending periodic pings to the
remote units.
on page 116
Comments? infodev@avaya.com
on page 122.
April 2015