Configuring Advanced Sound (Audio Output) Settings - Avaya Scopia XT7100 Deployment Manual

Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Procedure
1. Access call settings. From the XT Series web interface, select Administrator Settings >
Call > Preferences > General. From the endpoint's main menu, select Configure >
Advanced > Calls > Preferences > General.
2. For XT Series with an embedded MCU, define the time limit for meetings with multiple
participants in the Meeting Time Limit field.
By default, the time limit is Unlimited. The maximum limit you can set is 24 hours.
3. Define the time limit for point-to-point calls in the Call Time Limit field.
By default, the time limit is Unlimited. The maximum limit you can set is 24 hours.
Related Links
Advanced Configuration of the XT Series

Configuring Advanced Sound (Audio Output) Settings

About this task
In most cases, the Avaya Scopia
settings. However, for complex room setups, the XT Series allows you to carefully merge different
April 2015
on page 112.
Figure 90: Setting a time limit for videoconferences
on page 112
®
XT Series sound output is transparent and works with the default
Comments? infodev@avaya.com
Configuring Advanced Sound (Audio Output) Settings
®
Avaya Scopia XT Series Deployment Guide
131