Avaya Scopia XT7100 Deployment Manual page 56

Setting Up the XT Series Hardware
4. Attach the two connectors on the other end of the camera cable as shown in
Connecting cables to the XT5000 Series
the XT7000 Series
a. The HDMI connector to the HDMI socket labeled 1 on the Scopia
b. The connector for power and serial control to the
Codec Unit.
5. Connect the second camera
a. Connect the 10-meter VISCA crossed cable supplied with the camera kit.
®
Avaya Scopia XT Series Deployment Guide
56
on page 56 and
on page 56:
Figure 32: Connecting cables to the XT5000 Series
Figure 33: Connecting cables to the XT7000 Series
(Figure 34: Connecting the second camera
Comments? infodev@avaya.com
Figure 32:
Figure 33: Connecting cables to
®
XT Camera Switch.
horizontal HDMI socket on the XT
on page 57):
April 2015