Avaya Scopia XT7100 Deployment Manual page 148

Advanced Configuration of the XT Series
2. To save the camera to a new position, first move the camera and set its zoom.
• From the endpoint's main menu, select Control Camera (or from the In-Call menu, during
a call), and use the arrow and zoom keys to position the camera.
• From the XT Series web interface, select More Actions located just under the tabs, then
select Control Camera, and select the arrows and zoom icons to position the camera.
To position a remote camera with the XT Remote Control Unit, press near/far. To switch to a
different local camera, press ok/menu and select Video Source.
3. To store a new preset position:
• From the new XT Remote Control Unit, press ok/menu and select Presets, then press
the new position number (0-9).
• From the previous version of the XT Remote Control Unit, press the Presets > Memo key,
then press the new position number (0-99). To save positions 100-109, press * then 0-9.
For 110-119, press # then 0-9.
• From the XT Series web interface, select select Store on the row of the new position
number.
®
Avaya Scopia XT Series Deployment Guide
148
Figure 102: Recalling a camera preset with XT Remote Control Unit
Comments? infodev@avaya.com
April 2015