Avaya Scopia XT7100 Deployment Manual page 192

Troubleshooting the Avaya Scopia
2. Set the fields as described in
Table 54: Configuring video quality settings
Field Name
NetSense
Flow Control
Error strategies
Fluency
Lip-sync automatic
®
Avaya Scopia XT Series Deployment Guide
192
® XT Series
Figure 143: Configuring lip sync settings
Table 54: Configuring video quality settings
Description
Set to Yes to enable NetSense.
NetSense is a proprietary Scopia
which optimizes the video quality according to the available
bandwidth to minimize packet loss. As the available
bandwidth of a connection varies depending on data traffic,
NetSense's sophisticated algorithm dynamically scans the
video stream, and then reduces or improves the video
resolution to maximize quality with the available bandwidth.
Set to Yes to send a Flow Control request to the remote
endpoint in case of packet loss. It attempts to reduce the
speed of data flow to prevent overwhelming one side with
too much data.
If set to Yes, you can set the number of allowed line errors
before video is frozen.
Indicates the number of allowed line errors, if the Error
strategies field is set to Yes. Drag the slider to the required
value. At minimum setting, video frames freeze at the first
occurring error. At maximum setting, video frames never
freeze and errors are allowed to pass through.
Allows synchronizing audio with video. To have a perfect
synchronization between audio and video, you must adjust
according to the type of connection. If set to Yes, the
system will perform automatic synchronization (highly
recommended setting). If set to No, adjust manually by
dragging the Delay slider until you obtain the best
synchronization.
Comments? infodev@avaya.com
on page 192
®
Solution technology
Table continues...
April 2015