Avaya Scopia XT7100 Deployment Manual page 101

2. Configure the camera connection as described in
settings on page 101:
Table 21: Configuring general camera settings
Field Name
Default camera
April 2015
Figure 68: Configuring general camera settings from the web interface
Description
Select the port of the XT Codec Unit which you connected the default camera, which is
automatically activated when the system powers up. To configure your default camera
for the XT5000 Series, you can choose between HD1, [HD2, HD3, HD4 using the
®
Scopia XT Camera Switch], DVI, or USB. To configure the default camera for the
XT7000 Series, you can choose between HD1, HD2, [HD3, HD4, HD5 using the
®
Scopia XT Camera Switch], DVI, or USB.
Figure 69: Video inputs of the XT Codec Unit (XT5000 Series)
Figure 70: Video inputs of the XT Codec Unit (XT7000 Series)
• HD1( or HD1/HD2 in the case of the XT7000 Series): Select if you connected the
PTZ camera to the HDMI input of the XT Codec Unit. This is the most common
configuration.
Comments? infodev@avaya.com
Table 21: Configuring general camera
®
Avaya Scopia XT Series Deployment Guide
Configuring Cameras
Table continues...
101