Implementing External Api Control - Avaya Scopia XT7100 Deployment Manual

Planning the Topology of the Avaya Scopia
With the gateway approach less communication lines are needed. As all gateways do not connect at
the same time and not all calls are ISDN, many more endpoints can share the same ISDN
connection and gateway.
Before you begin
Enable Peer-to-Peer mode in the Scopia
®
Scopia Gateway documentation.
Procedure
1. Access the XT Series web interface, as described in
page 75.
2. Select Administrator Settings > Protocols > ISDN.
3. Configure the IDSN settings as described below:
Table 5: Supporting ISDN Connectivity
Field
Enable
Gateway IP Address
4. Select Save.
Related Links
Planning the Topology of the Avaya Scopia

Implementing External API Control

You can control the XT Codec Unit using the Avaya Scopia
with AMX, Creston, or Extron control devices). Contact Avaya customer support to receive the
Reference Guide for Avaya Scopia
Ethernet interface.
Related Links
Planning the Topology of the Avaya Scopia
®
Avaya Scopia XT Series Deployment Guide
30
® XT Series Deployment
®
Gateway for ISDN. For more information, see the
Figure 14: Enabling ISDN connectivity
Description
Select Yes to allow this Avaya Scopia
ISDN endpoints via the Scopia
Enter the IP address of the Scopia
your organization.
®
XT Series Deployment
®
XT Series API, which includes the list of commands over the
®
XT Series Deployment
Comments? infodev@avaya.com
Accessing XT Series Web Interface
®
XT Series to quickly dial
®
Gateway for ISDN.
®
Gateway for ISDN used by
on page 24
®
XT Series API (requires integration
on page 24
on
April 2015