Connecting Avaya Scopia ® Xt Series To The Network - Avaya Scopia XT7100 Deployment Manual

Setting Up the XT Series Hardware
If the monitor has visual preset modes, choose Cinema or Movie as the best choice for
videoconferencing.
If using the monitor's speakers, enable the monitor's noise reduction setting if available. See
the monitor's documentation for details.
Related Links
Setting Up the XT Series Hardware
Connecting Avaya Scopia
About this task
Your Avaya Scopia
gigabit LAN port, operating at speeds of 10 or 100 or 1000 megabits per second (Mbps).
Connect the network cable to the GLAN1
If required, you can enable GLAN2
XT Series and its Optional Features
For example, a small business can use the XT Series as a firewall traversal system (see
NAT and Firewall Traversal with Avaya Scopia
a call on its built-in MCU, and endpoints from both the public and private networks can access the
same videoconference. Connect one network port to the public network and the other to the private
network.
Another example of dual-NIC usage is when a large organization routes video on a higher
performance network, while routing the API control of the XT Series on another network.
®
Avaya Scopia XT Series Deployment Guide
46
on page 42
®
XT Series comes with two network ports (dual-NIC), where each is a GLAN or
with a license to use both network ports (see
on page 78).
Comments? infodev@avaya.com
®
XT Series to the Network
port.
®
XT Series on page 27), where the XT Series hosts
Activating the
Planning
April 2015