Configuring Advanced System Name Settings - Avaya Scopia XT7100 Deployment Manual

Advanced Configuration of the XT Series

Configuring Advanced System Name Settings

About this task
You can set the basic system name in the Quick Setup Wizard (see
Language, and Call Method
name, such as the SIP username.
The name is displayed on the system's title bar
shown to participants seeing your image in a videoconference (for example: John-Smith, or 9th-
Floor-Room, or NY-Office).
Depending on your integration, you can configure your XT Series to show one of several names:
• Use the system name as defined in the Quick Setup Wizard.
• Use the unicode version of the system name for non-English characters.
• Use the SIP username if this XT Series is registered to a SIP registrar or proxy. This is the
same as the System Name, unless you change it manually as described in
Series to a SIP Server
• Use the H.323 name if this XT Series is registered to a gatekeeper. This is the same as the
System Name, unless you change it manually as described in
Gatekeeper Settings
• Use the hostname, which is the same as the system name, but some characters like a space in
the name are replaced by a hyphen.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Procedure
1. Access the system name settings. From the XT Series web interface, select Administrator
Settings > System > Location. From the endpoint's main menu, select Configure >
Advanced > System > Location.
®
Avaya Scopia XT Series Deployment Guide
114
on page 84). This procedure describes how to use an alternate system
(Figure 78: XT Series's titlebar
Figure 78: XT Series's titlebar
on page 107.
on page 124.
Comments? infodev@avaya.com
Setting the System Name,
Configuring Advanced
on page 112.
on page 114), and is
Registering the XT
April 2015