Avaya Scopia XT7100 Deployment Manual page 41

Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series
Procedure
1. Access the port settings. From the XT Series web interface, select Administrator
Settings > Networks > Preferences > Dynamic Ports. From the endpoint's main menu,
select Configure > Advanced > Networks > Preferences > Dynamic Ports.
Figure 19: Configuring the TCP or UDP port range from the web interface
2. Define how the XT Series assigns ports by selecting one of the following from Auto detect:
• No: The XT Codec Unit uses the range of dynamic ports indicated and allows you to
define the base port (default and recommended setting).
• Yes: The XT Codec Unit assigns ports randomly, and you cannot define the base port.
3. If you selected No in the Auto detect list, you can modify the TCP or UDP base port in the
Ports field.
Important:
You can configure the base port to any value between 1024-65535. The number of ports
is calculated automatically by the system, depending on whether you have an MCU
license and its type.
4. From the web interface only, select Save.
Related Links
Implementing Port Security for the Avaya Scopia
April 2015
Implementing Port Security for the Avaya Scopia
on page 112.
®
XT Series
Avaya Scopia
Comments? infodev@avaya.com
on page 31
®
XT Series Deployment Guide
® XT Series
41