Upgrading The Avaya Scopia - Avaya Scopia XT7100 Deployment Manual

Upgrading the Avaya Scopia

Drive
About this task
Your Avaya Scopia
available at the time the system was shipped. We recommend that you always access the Avaya
site to check if a later version is available.
Before you begin
Check if a later version is available by accessing the Avaya site as explained in
Series on page 153. If a later version is available, download it and copy to the USB drive.
Procedure
1. Turn on the XT Series and wait for the menus to appear.
2. Insert the USB drive into one of the USB ports on the back panel of the XT Codec Unit.
The upgrade procedure begins automatically.
Caution:
Do not shut down the XT Series until the upgrade has completed.
3. Follow the instructions displayed on the screen.
The system restarts automatically after the upgrade procedure is completed.
4. The upgrade procedure may automatically continue after the reboot, and therefore reboot
again. Wait a few minutes to ensure that the upgrade procedure is completed.
5. If the upgrade fails, see
Related Links
Updating the XT Series
April 2015
®
®
XT Series comes with a USB drive containing the latest firmware version
Figure 109: The USB ports on the back panel
USB Software Upgrade Failure
on page 153
Comments? infodev@avaya.com
XT Series Software Using a USB
on page 199.
®
Avaya Scopia
Updating the XT Series
Updating the XT
XT Series Deployment Guide
155