Connecting Microphones And Speakers To The Xt Series - Avaya Scopia XT7100 Deployment Manual

2. (Optional, only for XT5000) To daisy-chain a second Three-way Microphone Pod, connect
the second microphone's output
3. Plan echo cancellation according to your audio setup:
Table 9: Configuring Echo Cancellation
Audio Setup
Microphone Pod (One-way or
three-way)
A single third-party
microphone (without echo
cancellation)
Audio mixer
Related Links

Connecting Microphones and Speakers to the XT Series

April 2015
Figure 38: Connecting a microphone to the XT Codec Unit
to the first Microphone Pod input
Figure 39: Connecting an additional three-way Microphone Pod
Configure Echo Cancellation
XT Series enables its own echo cancellation by default.
Enable the XT Series built-in echo cancellation (see
Advanced Echo Cancellation on External Microphones
page 137).
Disable the XT Series built-in echo cancellation (see
Microphones
audio mixer's settings, or (ideally) on each microphone.
Comments? infodev@avaya.com
Connecting Microphones and Speakers to the XT Series
on page 104). You then cancel the echo either in the
on page 59
®
Avaya Scopia XT Series Deployment Guide
.
Configuring
on
Configuring
63