Avaya Scopia XT7100 Deployment Manual page 92

Initial Configuration of the XT Series
Before you begin
1. Verify your computer is running either Windows XP/Vista/7/8, or if it is a Mac, verify it is
running OSX 10.x, up to 10.9.
2. Connect your computer to the Scopia
Series on page 65).
3. Perform the Quick Setup wizard, which ends with the Scopia
install it at any time from the web interface.
Procedure
1. The Quick Setup wizard provides the web address to access your endpoint from the web,
and displays a user code to pair a computer's keyboard and mouse to the endpoint. You
enter this code at the end of the installation, so make a note of it now.
2. Select Minimize to remove the window and expose your computer content.
3. Access the XT Series web interface, as described in
page 75.
4. In the main web page of the endpoint, in the Home > XT Control section, select Create
package (Figure 60: Installing Scopia
5. For Mac users only, copy the setup package to a folder on your computer, and launch the
®
Scopia XT Control:
You may need to follow the steps in
®
Avaya Scopia XT Series Deployment Guide
92
®
Figure 59: Installing Scopia
®
Figure 60: Installing Scopia
Resolving download problems
Comments? infodev@avaya.com
XT Executive (see Connecting a Computer to the XT
®
®
XT Control from the Quick Setup
Accessing XT Series Web Interface
XT Control for Windows
®
XT Control for Windows
XT Control installation, or
on page 92).
on page 198.
April 2015
on