Configuring Advanced Regional Audio And Video Settings - Avaya Scopia XT7100 Deployment Manual

Advanced Configuration of the XT Series

Configuring Advanced Regional Audio and Video Settings

About this task
After you set the country and language of the device in the Quick Setup Wizard, the system defaults
to the audio and video standards of that country. This section details how to change those settings if
required.
Procedure
1. Access the XT Series web interface, as described in
page 75.
2. Select Administrator Settings > System > Location.
3. Define regional settings as described in
page 136.
Table 39: Configuring regional information
Field Name
System name
Country
Language
Audio coding
Video frequency
®
Avaya Scopia XT Series Deployment Guide
136
Figure 95: Setting regional information
Table 39: Configuring regional information
Description
Enter the name which appears in the local endpoint title bar and in the
remote endpoint interface (if connected).
Select the location of the XT Series. This populates the other fields
automatically.
Select the language used in the XT Series endpoint's interface.
Select the European or US audio coding, used by audio equipment in
your location.
The video refresh frequency depends on the country, and may be 50Hz or
60Hz. If you set it to <auto>, the system assigns the standard of the
chosen country.
Comments? infodev@avaya.com
Accessing XT Series Web Interface on
on
Table continues...
April 2015