Avaya Scopia XT7100 Deployment Manual page 99

Field Description
Name
Gallery Select Yes to add availability of video layouts which mix video and presentation in the same
Layout stream and display them on the same screen, so participant images appear to the side or
underneath the presentation. This is displayed when you have just one monitor, managed by
®
Scopia Management, and the meeting hosted on the Scopia
Duplicate
Select Yes if you have two monitors and you want the monitor connected to HD2
to HD2
the same as HD1
4. From the web interface only, select Save.
5. Configure the video layout. Select Monitor > PIP-PaP-PoP.
6. Enter the field values as described in
Table 20: Configuring the video layout
Field Name
Multi Image Mode
Multi Image Type
April 2015
but without system menus.
Figure 67: Setting the video layout
Description
Enable PIP, PaP or PoP video layouts, depending on the number of video streams
available (see Figure 64: Single monitor video layouts with presentation
• <auto > enables PiP, PaP or PoP only when the number of video streams is greater
than the number of available monitors. The order of the video streams is set
automatically, with precedence to the presentation video streams.
• On always enables PiP, PaP or PoP when at least two video streams are used.
When you are using two monitors, PIP can be forced only if there are at least three
different video streams.
• Off always disables PIP, PaP and PoP.
Limit the video layouts available to users:
• auto enables PIP, PaP and PoP layouts. Press the Layouts
between PIP, PaP and PoP.
• PIP enables only PiP.
Comments? infodev@avaya.com
®
Table 20: Configuring the video layout
®
Avaya Scopia
Configuring Monitors
Elite MCU.
to display
on page 99.
on page 97).
key to switch
Table continues...
XT Series Deployment Guide
99