Configuring Basic Gatekeeper Settings - Avaya Scopia XT7100 Deployment Manual

Related Links
Configuring Basic Settings with the Quick Setup Wizard

Configuring Basic Gatekeeper Settings

About this task
Configure the gatekeeper settings if your Avaya Scopia
routes audio and video H.323 calls by resolving dial strings (H.323 alias or URI) into the IP address
of an endpoint, and handles the initial connection of calls. To modify advanced gatekeeper settings,
see Configuring Advanced Gatekeeper Settings
Procedure
1. Access the Quick Setup Wizard from the endpoint, as described in
Settings with the Quick Setup Wizard
2. Configure the gatekeeper connection as described in the following table.
Field
Use Gatekeeper
Mode or Automatic IP
Address
Gatekeeper IP address
E.164
3. If you are registering your endpoint to a SIP server, select Next and continue with
Configuring Basic SIP Settings
Setup Wizard.
April 2015
Configuring Basic Settings with the Quick Setup Wizard
on page 83
®
XT Series works with one. A gatekeeper
on page 124.
on page 83, and skip to this step.
Figure 57: Gatekeeper settings
Description
Choose whether this endpoint is registered to a gatekeeper, like
®
the Avaya Scopia ECS Gatekeeper.
Choose whether the gatekeeper is configured to automatically
detect endpoints. For more information, ask your network
administrator.
Enter the IP address of the gatekeeper.
Enter the H.323 number required to dial the XT Series.
on page 90. Otherwise, select Done to complete the Quick
Avaya Scopia
Comments? infodev@avaya.com
Configuring Basic
®
XT Series Deployment Guide
89