Avaya Scopia XT7100 Deployment Manual page 106

Initial Configuration of the XT Series
Field
General
POD1
Digital Audio
Analog Audio
HD
USB Camera
USB Microphone
3. Set the fields as required.
Table 23: Configuring analog audio input
Field Name
Enabled
Gain
Echo canceller
®
Avaya Scopia XT Series Deployment Guide
106
Description
Enable auto-detection of microphones connected to the unit.
Configure the port for the Microphone Pod.
Configure the port when connecting a third-party digital
microphone via its mini-TOSlink connector.
Configure the port when connecting the One-way Microphone
Pod or a third-party analog microphone via its 3.5mm jack.
Select to configure sound from HDMI devices.
Configure the USB port for audio of a built-in microphone from a
USB camera. If you connect another audio input with echo
cancellation enabled, the audio from the USB camera is disabled.
Configure the USB port for audio of a dedicated USB microphone or
headset. However, any connected Microphone Pods are disabled
by default. To change this, set I/O connections > Audio - Input >
General > Audio Inputs Management to Automatic.
Figure 74: Configuring the audio input
Description
Enables/disables this audio input.
Set the volume booster to the desired level by using the slider.
If you are using an external microphone without an audio mixer,
enable the XT Series built-in echo cancellation. Typically, you use
the default echo cancellation settings. To configure the advanced
settings, such as disabling Automatic Gain Control, see
Advanced Echo Cancellation on External Microphones
page 137.
Comments? infodev@avaya.com
Configuring
on
Table continues...
April 2015