Pairing An Xt Remote Control Unit - Avaya Scopia XT7100 Deployment Manual

Controlling the XT Series

Pairing an XT Remote Control Unit

About this task
If you have multiple XT Series units in the same room, you can pair a XT Remote Control Unit with
its XT Codec Unit so that every unit has its dedicated remote, so when you press a key on a remote,
it triggers an action on the correct XT Series unit. Enter the same numeric code in both the XT
Series and its XT Remote Control Unit to pair them. By default all remotes and endpoints use the
same code 01.
Procedure
1. Access the general settings. From the XT Series web interface, select Basic Settings >
General. From the endpoint's main menu, select Configure > General.
You can use the XT Remote Control Unit's initial default pairing to perform this task.
2. Enter a two-digit numeric code between 01 and 99 in the Remote Control Code field.
3. From the web interface only, select Save.
4. On the XT Remote Control Unit, press the * and # keys simultaneously until its red light
blinks twice.
®
Avaya Scopia XT Series Deployment Guide
72
Figure 47: Setting the XT Remote Control Unit Code
Comments? infodev@avaya.com
April 2015