Avaya Scopia XT7100 Deployment Manual page 141

Procedure
1. Access the LDAP settings. From the XT Series web interface, select Administrator
Settings > System > LDAP. From the endpoint's main menu, select Configure >
Advanced > System > LDAP.
Figure 98: Configuring LDAP settings from the web interface
2. Select Add or Add Server.
3. Configure the LDAP server settings as described in
settings on page 141.
If your XT Series is managed by Scopia
Table 42: Configuring LDAP server settings
Field Name Description
Preferred Select Yes to view this LDAP's contacts in the Contacts page. Select No to define the LDAP
server but hide it from the Contacts page.
April 2015
Figure 99: Adding LDAP servers from the web interface
Comments? infodev@avaya.com
Configuring XT Series to use LDAP Directory
Table 42: Configuring LDAP server
®
Management, these fields are automatically filled.
®
Avaya Scopia XT Series Deployment Guide
Table continues...
141