Configuring Basic Network Settings - Avaya Scopia XT7100 Deployment Manual

3. Press 1 to highlight the triangle in the top left corner in blue.
4. Use the arrow keys to position the image, so all sides of the white border of the triangle are
visible in the screen, then press ok/menu.
5. Press 2 to highlight the triangle in the bottom right corner in blue.
6. Adjust the image position in the same way, until all sides of the triangle border are visible,
then press ok/menu.
7. To continue with the Quick Setup Wizard, select Next (see
Settings on page 87).
Related Links
Configuring Basic Settings with the Quick Setup Wizard

Configuring Basic Network Settings

About this task
This procedure describes how to set up the basic network settings and the IP address of the XT
Series as part of the Quick Setup Wizard. To modify advanced network settings, see
Advanced Network Settings
Procedure
1. Access the Quick Setup Wizard from the endpoint, as described in
Settings with the Quick Setup Wizard
April 2015
Configuring Basic Settings with the Quick Setup Wizard
Figure 55: Examining the image position
on page 116.
on page 83, and skip to this step.
Comments? infodev@avaya.com
Configuring Basic Network
on page 83
Configuring Basic
®
Avaya Scopia XT Series Deployment Guide
Configuring
87