Avaya Scopia XT7100 Deployment Manual page 66

Setting Up the XT Series Hardware
Procedure
1. If your computer has a DVI port, connect it to the DVI port on the XT Codec Unit.
Alternatively, use the supplied DVI-VGA adapter to connect a VGA cable from the adapter to
the computer's VGA port.
2. Connect the computer audio to the audio-in
both analog and digital optical audio.
Important:
Participants in the meeting can hear your computer's audio even if you mute the audio
on the XT Series.
When you connect a computer's audio output to the XT Series, the echo cancellation for this
analog input is disabled by default (see
3. Set the computer's resolution by accessing the operating system graphics settings.
4. Select your screen resolution and refresh rates from the list of supported settings (see
10: Supported computer monitor resolutions and refresh rates
®
Avaya Scopia XT Series Deployment Guide
66
Figure 42: Connecting a computer's display to the XT Series
Figure 43: Connecting a computer's audio to the XT Series
Comments? infodev@avaya.com
port on the XT Codec Unit, which supports
Configuring Microphones on page 104).
on page 67).
April 2015
Table